Installation Plan of Anchor Bolt

Anchor Bolt in the foundation loose treatment in close to tightening anchor bolts, the bolt may be pulled out, the bolt should be adjusted to the original position, and the bolts around the foundation shovel out enough position, and then weld the bolt on the two U-shaped steel bars, finally, the water will be cleaned and grouted, to the concrete solidification to the design strength and then tighten the deviation of the live Anchor bolt processing method of the deviation of the live anchor bolt, roughly the same method as the dead anchor Bolt, only the anchor bolts can be pulled out.

such as the bolt is too long, can be cut on the machine tool for a section of the screw thread; If the bolt is too short, the available hot forging is stretched;